搜索附件  
头雁微网 附件中心 技术应用 情报信息 电子安全手册Electrical Safety Handbook: Electrical Safety Handbook.part1.rar
板块导航
附件中心&附件聚合2.0
For Discuz! X3.5 © hgcad.com

电子安全手册Electrical Safety Handbook: Electrical Safety Handbook.part1.rar

 

电子安全手册Electrical Safety Handbook:
Electrical Safety Handbook


Copyright © 2006 by The McGraw-Hill Companies, Inc. All rights reserved. Manufactured in the
United States of America. Except as permitted under the United States Copyright Act of 1976, no part
of this publication may be reproduced or distributed in any form or by any means, or stored in a database
or retrieval system, without the prior written permission of the publisher.
0-07-158912-0
The material in this eBook also appears in the print version of this title: 0-07-145772-0.
All trademarks are trademarks of their respective owners. Rather than put a trademark symbol after
every occurrence of a trademarked name, we use names in an editorial fashion only, and to the
benefit of the trademark owner, with no intention of infringement of the trademark. Where such
designations appear in this book, they have been printed with initial caps.
McGraw-Hill eBooks are available at special quantity discounts to use as premiums and sales
promotions, or for use in corporate training programs. For more information, please contact George
Hoare, Special Sales, at george_hoare@mcgraw-hill.com or (212) 904-4069.
TERMS OF USE
This is a copyrighted work and The McGraw-Hill Companies, Inc. (“McGraw-Hill”) and its licensors
reserve all rights in and to the work. Use of this work is subject to these terms. Except as permitted
under the Copyright Act of 1976 and the right to store and retrieve one copy of the work, you may not
decompile, disassemble, reverse engineer, reproduce, modify, create derivative works based upon,
transmit, distribute, disseminate, sell, publish or sublicense the work or any part of it without
McGraw-Hill’s prior consent. You may use the work for your own noncommercial and personal use;
any other use of the work is strictly prohibited. Your right to use the work may be terminated if you
fail to comply with these terms.
THE WORK IS PROVIDED “AS IS.” McGRAW-HILL AND ITS LICENSORS MAKE NO GUARANTEES
OR WARRANTIES AS TO THE ACCURACY, ADEQUACY OR COMPLETENESS OF
OR RESULTS TO BE OBTAINED FROM USING THE WORK, INCLUDING ANY INFORMATION
THAT CAN BE ACCESSED THROUGH THE WORK VIA HYPERLINK OR
OTHERWISE, AND EXPRESSLY DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. McGraw-Hill and its licensors do not warrant or
guarantee that the functions contained in the work will meet your requirements or that its operation
will be uninterrupted or error free. Neither McGraw-Hill nor its licensors shall be liable to you or
anyone else for any inaccuracy, error or omission, regardless of cause, in the work or for any damages
resulting therefrom. McGraw-Hill has no responsibility for the content of any information accessed
through the work. Under no circumstances shall McGraw-Hill and/or its licensors be liable for any
indirect, incidental, special, punitive, consequential or similar damages that result from the use of or
inability to use the work, even if any of them has been advised of the possibility of such damages. This
limitation of liability shall apply to any claim or cause whatsoever whether such claim or cause arises
in contract, tort or otherwise.
DOI: 10.1036/0071457720
To my wife, Sheryl, for her love and support.
John Cadick
To my wife, Brenda Neitzel, who always believed in
me and who encouraged me to continue my education
and strive to be the best that I could be; to the U.S.
Air Force for giving me my start in an electrical
career; to all of my employers, who gave me
countless opportunities to learn and progress; and
to John Cadick, who believed in me enough to ask
me to contribute to this book.
Dennis Neitzel
In dedication especially to Michael Allen, the father
of Sarah, Benjamin, Amelia, and Natalie, with my
hope that each will continue to learn the most they
can from books.
Mary Capelli-Schellpfeffer
CONTENTS
Foreword xvii
Preface xix
Acknowledgments xxi
Chapter 1. Hazards of Electricity 1.1
Introduction / 1.1
Glossary / 1.1
Hazard Analysis / 1.2
Shock / 1.2
Description / 1.2
Influencing Factors / 1.3
Arc / 1.7
Definition and Description / 1.8
Arc Energy Release / 1.9
Arc Energy / 1.12
Arc Energy Input / 1.12
Arcing Voltage / 1.13
Arc Surface Area / 1.13
Incident Energy / 1.14
Arc Burns / 1.16
Blast / 1.16
Affected Body Parts / 1.17
General / 1.17
Skin / 1.19
The Nervous System / 1.20
Muscular System / 1.21
The Heart / 1.22
The Pulmonary System / 1.23
Summary of Causes—Injury and Death / 1.23
Shock Effect / 1.23
Arc Flash Effect / 1.24
Causes of Injury / 1.24
Causes of Death / 1.25
Protective Strategies / 1.25
References / 1.26
Chapter 2. Electrical Safety Equipment 2.1
Introduction / 2.1
Glossary / 2.1
General Inspection and Testing Requirements for Electrical
Safety Equipment / 2.2
For more information about this title, click here
Flash and Thermal Protection / 2.2
A Note on When to Use Thermal Protective Clothing / 2.2
Thermal Performance Evaluation / 2.3
Clothing Materials / 2.4
Non-Flame-Resistant Materials / 2.5
Flame-Resistant Materials / 2.6
Work Clothing / 2.9
Flash Suits / 2.11
Head, Eye, and Hand Protection / 2.13
Head and Eye Protection / 2.14
Hard Hats / 2.14
Safety Glasses, Goggles, and Face Shields / 2.15
Rubber-Insulating Equipment / 2.15
Rubber Gloves / 2.16
Rubber Mats / 2.20
Rubber Blankets / 2.21
Rubber Covers / 2.22
Line Hose / 2.25
Rubber Sleeves / 2.26
In-Service Inspection and Periodic Testing of Rubber Goods / 2.29
Hot Sticks / 2.44
Description and Application / 2.44
When to Use / 2.47
How to Use / 2.47
Testing Requirements / 2.47
Insulated Tools / 2.48
Description and Application / 2.48
When to Use / 2.49
How to Use / 2.49
Barriers and Signs / 2.49
Barrier Tape / 2.49
Signs / 2.49
When and How to Use / 2.50
Safety Tags, Locks, and Locking Devices / 2.51
Safety Tags / 2.51
Locks and Multiple-Lock Devices / 2.52
Locking Devices / 2.53
When/Where to Use Lockout Tagout / 2.53
Voltage-Measuring Instruments / 2.54
Safety Voltage Measurement / 2.54
Proximity Testers / 2.55
Contact Testers / 2.56
Selecting Voltage-Measuring Instruments / 2.57
Instrument Condition / 2.59
Low Voltage Voltmeter Safety Standards / 2.60
Three-Step Voltage Measurement Process / 2.60
General Considerations for Low-Voltage Measuring Instruments / 2.62
Safety Grounding Equipment / 2.63
The Need for Safety Grounding / 2.63
Safety Grounding Switches / 2.64
Safety Grounding Jumpers / 2.65
Selecting Safety Grounding Jumpers / 2.70
Installation and Location / 2.74
Ground Fault Circuit Interrupters / 2.74
Operating Principles / 2.74
Applications / 2.75
Safety Electrical One-Line Diagram / 2.78
The Electrician’s Safety Kit / 2.78
References / 2.79
viii CONTENTS
CONTENTS ix
Chapter 3. Safety Procedures and Methods 3.1
Introduction / 3.1
The Six-Step Safety Method / 3.1
Think—Be Aware / 3.2
Understand Your Procedures / 3.2
Follow Your Procedures / 3.2
Use Appropriate Safety Equipment / 3.2
Ask If You Are Unsure, and Do Not Assume / 3.2
Do Not Answer If You Do Not Know / 3.3
Pre-Job Briefings / 3.3
Definition / 3.3
What Should Be Included? / 3.3
When Should Pre-Job Briefings Be Held? / 3.3
Energized or De-Energized? / 3.3
The Fundamental Rules / 3.3
A Hot-Work Decision Tree / 3.5
After the Decision Is Made / 3.6
Safe Switching of Power Systems / 3.6
Introduction / 3.6
Remote Operation / 3.7
Operating Medium-Voltage Switchgear / 3.7
Operating Low-Voltage Switchgear / 3.11
Operating Molded-Case Breakers and Panelboards / 3.15
Operating Enclosed Switches and Disconnects / 3.17
Operating Open-Air Disconnects / 3.18
Operating Motor Starters / 3.20
Energy Control Programs / 3.23
General Energy Control Programs / 3.23
Specific Energy Control Programs / 3.24
Basic Energy Control Rules / 3.24
Lockout-Tagout / 3.26
Definition and Description / 3.26
When to Use Locks and Tags / 3.26
Locks without Tags or Tags without Locks / 3.26
Rules for Using Locks and Tags / 3.27
Responsibilities of Employees / 3.27
Sequence / 3.28
Lock and Tag Application / 3.28
Isolation Verification / 3.28
Removal of Locks and Tags / 3.28
Safety Ground Application / 3.29
Control Transfer / 3.31
Nonemployees and Contractors / 3.31
Lockout-Tagout Training / 3.31
Procedural Reviews / 3.32
Voltage-Measurement Techniques / 3.32
Purpose / 3.32
Instrument Selection / 3.32
Instrument Condition / 3.33
Three-Step Measurement Process / 3.34
What to Measure / 3.34
How to Measure / 3.36
Placement of Safety Grounds / 3.37
Safety Grounding Principles / 3.37
Safety Grounding Location / 3.38
Application of Safety Grounds / 3.38
The Equipotential Zone / 3.43
Removal of Safety Grounds / 3.44
Control of Safety Grounds / 3.44
Flash Hazard Calculations and Approach Distances / 3.46
Introduction / 3.46
Approach Distance Definitions / 3.46
Determining Shock Hazard Approach Distances / 3.46
Calculating the Flash Hazard Minimum Approach Distance
(Flash Protection Boundary) / 3.49
Calculating the Required Level of Arc Protection (Flash Hazard Calculations) / 3.51
Introduction / 3.51
The Lee Method / 3.52
Methods Outlined in NFPA 70E / 3.52
IEEE Standard Std 1584-2002 / 3.53
Software Solutions / 3.55
Required PPE for Crossing the Flash Hazard Boundary / 3.55
A Simplified Approach to the Selection of Protective Clothing / 3.56
Barriers and Warning Signs / 3.56
Illumination / 3.61
Conductive Clothing and Materials / 3.61
Confined Work Spaces / 3.62
Tools and Test Equipment / 3.62
General / 3.62
Authorized Users / 3.62
Visual Inspections / 3.63
Electrical Tests / 3.63
Wet and Hazardous Environments / 3.63
Field Marking of Potential Hazards / 3.65
The One-Minute Safety Audit / 3.65
References / 3.66
Chapter 4. Grounding of Electrical Systems and Equipment 4.1
Introduction / 4.1
Electric Shock Hazard / 4.1
General Requirements for Grounding and Bonding / 4.2
Definitions / 4.2
Grounding of Electrical Systems / 4.3
Grounding of Electrical Equipment / 4.6
Bonding of Electrically Conductive Materials and Other Equipment / 4.6
Performance of Fault Path / 4.8
Arrangement to Prevent Objectionable Current / 4.8
Alterations to Stop Objectionable Current / 4.8
Temporary Currents Not Classified as Objectionable Current / 4.8
Connection of Grounding and Bonding Equipment / 4.8
Protection of Ground Clamps and Fittings / 4.9
Clean Surfaces / 4.9
System Grounding / 4.9
Purposes of System Grounding / 4.9
Grounding Service-Supplied Alternating-Current Systems / 4.9
Conductors to Be Grounded—Alternating-Current Systems / 4.11
Main Bonding Jumper / 4.11
Grounding Electrode System / 4.12
Grounding Electrode System Resistance / 4.14
Grounding Electrode Conductor / 4.14
Grounding Conductor Connection to Electrodes / 4.16
Bonding / 4.18
x CONTENTS
Equipment Grounding / 4.19
Equipment to Be Grounded / 4.19
Grounding Cord- and Plug-Connected Equipment / 4.19
Equipment Grounding Conductors / 4.21
Sizing Equipment Grounding Conductors / 4.22
Use of Grounded Circuit Conductor for Grounding Equipment / 4.22
Ferroresonance / 4.25
Summary / 4.27
Chapter 5. Electrical Maintenance and Its Relationship to Safety 5.1
Introduction / 5.1
The Safety-Related Case for Electrical Maintenance / 5.1
Overview / 5.1
Regulatory / 5.2
Relationship of Improperly Maintained Electrical Equipment to the
Hazards of Electricity / 5.2
Hazards Associated with Electrical Maintenance / 5.3
The Economic Case for Electrical Maintenance / 5.3
Reliability Centered Maintenance (RCM) / 5.4
What is Reliability Centered Maintenance? / 5.5
A Brief History of RCM / 5.5
RCM in the Industrial and Utility Arena / 5.5
The Primary RCM Principles / 5.6
Failure / 5.8
Maintenance Actions in an RCM Program / 5.8
Impact of RCM on a Facilities Life Cycle / 5.9
Conclusion / 5.10
The Eight Step Maintenance Program / 5.10
Introduction / 5.11
Step 1—Plan / 5.11
Step 2—Inspect / 5.11
Step 3—Clean / 5.12
Step 4—Tighten / 5.12
Step 5—Lubricate / 5.12
Step 6—Test / 5.13
Step 7—Record / 5.13
Step 8—Evaluate / 5.13
Frequency of Maintenance / 5.14
Determining Testing Intervals / 5.14
Summary / 5.14
Maintenance Requirements for Specific Equipment and Locations / 5.14
General Maintenance Requirements / 5.14
Substations, Switchgear, Panel Boards, Motor Control Centers, and
Disconnect Switches / 5.15
Fuse Maintenance Requirements / 5.16
Molded-Case Circuit Breakers / 5.16
Low-Voltage Power Circuit Breakers / 5.18
Medium Voltage Circuit Breakers / 5.20
Protective Relays / 5.21
Rotating Equipment / 5.23
Portable Electric Tools and Equipment / 5.23
Personal Safety and Protective Equipment / 5.24
Conclusion / 5.24
References / 5.24
CONTENTS xi
Chapter 6. Regulatory and Legal Safety Requirements
and Standards 6.1
Introduction / 6.1
The Regulatory Bodies / 6.1
The American National Standards Institute (ANSI) / 6.1
The Institute of Electrical and Electronic Engineers (IEEE) / 6.3
National Fire Protection Association (NFPA) / 6.3
American Society for Testing and Materials (ASTM) / 6.4
American Society of Safety Engineers (ASSE) / 6.5
The Occupational Safety and Health Administration (OSHA) / 6.6
Other Electrical Safety Organizations / 6.12
The National Electrical Safety Code (NESC)—ANSI C-2 / 6.12
General Description / 6.12
Industries and Facilities Covered / 6.13
Technical/Safety Items Covered / 6.13
The National Electrical Code (NEC)—ANSI/NFPA 70 / 6.14
General Description / 6.14
Industries and Facilities Covered / 6.15
Technical and Safety Items Included / 6.15
Electrical Equipment Maintenance—ANSI/NFPA 70B / 6.15
General Description / 6.15
Industries and Facilities Covered / 6.16
Technical and Safety Items Covered / 6.16
Standard for Electrical Safety in the Workplace—ANSI/NFPA 70E / 6.16
General Description / 6.16
Industries and Facilities Covered / 6.17
Technical Safety Items Covered / 6.18
The American Society for Testing and Materials (ASTM) Standards / 6.19
Occupational Safety and Health Administration (OSHA) Standards / 6.19
Overview / 6.19
General Industry / 6.19
Construction Industry / 6.22
Chapter 7. Accident Prevention, Accident Investigation,
Rescue, and First Aid 7.1
Accident Prevention / 7.1
Individual Responsibility / 7.1
Installation Safety / 7.1
Power System Studies / 7.3
First Aid / 7.7
General First Aid / 7.8
Resuscitation (Artificial Respiration) / 7.12
Heart-Lung Resuscitation / 7.12
Rescue Techniques / 7.14
General Rescue Procedures / 7.14
Elevated Rescue / 7.18
Confined-Space Rescue / 7.30
Ground-Level Rescue / 7.31
Accident Investigation / 7.37
Purpose / 7.37
General Rules / 7.38
Data Gathering / 7.38
Accident Analysis / 7.40
xii CONTENTS
Chapter 8. Medical Aspects of Electrical Trauma 8.1
Introduction / 8.1
Statistical Survey / 8.1
Non-Occupational Electrical Trauma / 8.4
Fatality and Injury Related Costs / 8.4
Electrical Events / 8.6
Electrocution and Electrical Fatalities / 8.7
Medical Aspects / 8.8
Non-Electrical Effects in Electrical Events / 8.10
Stabilization and Initial Evaluation / 8.13
Medical and Surgical Intervention / 8.14
Rehabilitation Focus and Return to Work Planning / 8.16
Reentry to Employment Settings / 8.16
Plateau in Recovery / 8.16
References / 8.18
Chapter 9. Low-Voltage Safety Synopsis 9.1
Introduction / 9.1
Low-Voltage Equipment / 9.1
Extension Cords / 9.2
Plug- and Cord-Connected Equipment / 9.3
Current Transformers / 9.5
Grounding Low-Voltage Systems / 9.5
What Is a Ground? / 9.5
Bonding Versus Grounding / 9.6
Voltage Hazards / 9.6
System Grounds / 9.8
Equipment Grounds / 9.11
Ground Fault Circuit Interrupters / 9.14
Safety Equipment / 9.14
Overview / 9.14
Hard Hats / 9.14
Eye Protection / 9.15
Arc Protection / 9.18
Rubber Insulating Equipment / 9.18
Voltage-Testing Devices / 9.18
Safety Procedures / 9.20
General / 9.20
Approach Distances / 9.20
Voltage Measurement / 9.20
Locking and Tagging / 9.21
Closing Protective Devices After Operation / 9.21
Electrical Safety Around Electronic Circuits / 9.21
The Nature of the Hazard / 9.21
Special Safety Precautions / 9.22
Stationary Battery Safety / 9.23
Introduction / 9.23
Basic Battery Construction / 9.24
Safety Hazards of Stationary Batteries / 9.25
Battery Safety Procedures / 9.25
Chapter 10. Medium- and High-Voltage Safety Synopsis 10.1
Introduction / 10.1
High-Voltage Equipment / 10.1
Current Transformers / 10.1
CONTENTS xiii
Grounding Systems of Over 1000 V / 10.3
What Is a Ground? / 10.3
Bonding Versus Grounding / 10.4
Voltage Hazards / 10.5
System Grounds / 10.5
Equipment Grounds / 10.7
Safety Equipment / 10.7
Overview / 10.7
Hard Hats / 10.8
Eye Protection / 10.8
Arc Protection / 10.9
Rubber Insulating Equipment / 10.9
Voltage-Testing Devices / 10.9
Safety Procedures / 10.12
General / 10.12
Approach Distances / 10.12
Voltage Measurement / 10.13
Locking and Tagging / 10.13
Closing Protective Devices After Operation / 10.13
Chapter 11. Human Factors in Electrical Safety 11.1
Introduction / 11.1
Background / 11.1
Power Systems and Human Factors / 11.3
Visualization / 11.4
Cognitive Ergonomics / 11.4
Summary / 11.8
References / 11.8
Chapter 12. Safety Management and Organizational Structure 12.1
Introduction / 12.1
Electrical Safety Program Structure / 12.1
Electrical Safety Program Development / 12.2
The Company Electrical Safety Team / 12.2
Company Safety Policy / 12.4
Assessing the Need / 12.4
Problems and Solutions / 12.4
Program Implementation / 12.5
Examples / 12.5
Company Safety Procedures / 12.7
Results Assessment / 12.7
Employee Electrical Safety Teams / 12.8
Reason / 12.8
Method / 12.8
Safety Meetings / 12.9
Who Attends / 12.9
What Material Should Be Covered / 12.9
When Meetings Should Be Held / 12.10
Where Meetings Should Be Held / 12.10
How Long Meetings Should Be / 12.10
Evaluation of Safety Meetings / 12.10
Outage Reports / 12.11
Safety Audits / 12.11
xiv CONTENTS
Description / 12.11
Purposes / 12.12
Procedure / 12.12
The Audit Team / 12.14
Audit Tools / 12.14
Follow-Up / 12.14
Internal versus External Audits / 12.14
Chapter 13. Safety Training Methods and Systems 13.1
Introduction / 13.1
Safety Training Definitions / 13.1
Training Myths / 13.2
Conclusion / 13.3
Elements of a Good Training Program / 13.3
Classroom Training / 13.3
On-the-Job Training (OJT) / 13.5
Self-training / 13.6
Conclusion / 13.6
On-the-Job Training / 13.6
Setup / 13.6
Implementation / 13.8
Evaluation / 13.8
Conclusion / 13.9
Training Consultants and Vendors / 13.9
Canned Programs and Materials / 13.9
Tailored Programs / 13.10
Training Analysis / 13.10
Evaluating Training Vendors and Consultants / 13.11
Conclusion / 13.11
Training Program Setup—A Step-By-Step Method / 13.12
Introduction / 13.12
Background / 13.12
A Plan / 13.14
Analyze / 13.14
Design / 13.16
Develop / 13.17
Implementation / 13.18
Evaluation / 13.18
Modification / 13.19
:11bb
:11bb
:11bb :11bb :11bb :11bb :11bb
xiexie xiexie xiexie
下载了好多你提供的资料,非常感谢!:53bb
谢谢!谢谢!很好的资料,值得保存。
:18bb :18bb 谢谢楼主的分享。
very good book and thanks a lot for sharing with us!
:27bb 4# 00d44
客服中心 搜索
关于我们
关于我们
关注我们
联系我们
帮助中心
资讯中心
企业生态
社区论坛
服务支持
资源下载
售后服务
推广服务
关注我们
官方微博
官方空间
官方微信
返回顶部